priority = [ 2, 6, 1, 7, 10, 8, 5] time = [30,200,20,70,120,60, 150] # # define number of tasks: don't hardwire this but rather use the len() command n_tasks = len(priority) max_time = max(time) print ( f"TASK PRIORITY TIME TO COMPLETE") # you need to add an appropriate for loop here and modify the next print statement so that you can print out all tasks for task in range (0, n_tasks): print (f" {task+1} {priority[task]} {time[task]}")

test_list = [ 4, 5, 3, 7, 11, 2] max_value = max(test_list) # use function max() to find maximum value in list max_index = test_list.index(max_value) # use method list.index () to find the index where this max occurs print (f' the index of the max value in list is {max_index} and max is {test_list[max_index]}')

test_list = [ 4, 5, 3, 7, 11, 2] time_list = [30, 45, 20, 120, 90, 70 ] max_value = max(test_list) max_index = test_list.index(max_value) task_time = time_list[max_index] # input the time it takes to complete this task print (f' the index of the max value in list is {max_index} and max is {test_list[max_index]} and takes {task_time} time to complete') # print out values as in Step #2 plus the time it takes to complete task

max_time = 6 * 60 # this is not the maximum time available for your example but rather for testing time_used = 3 * 60 # # Following 6 statements are from Step 3 test_list = [ 4, 5, 3, 7, 11, 2] time_list = [30, 45, 20, 120, 90, 70 ] max_value = max(test_list) max_index = test_list.index(max_value) task_time = time_list[max_index] # input the time it takes to complete this task print (f' the index of the max value in list is {max_index} and max is {test_list[max_index]} and takes {task_time} time to complete') # # Add conditional to see if this task can be completed in the allotted time if ( task_time < (max_time - time_used) ) : time_used = time_used + task_time print (f' number {max_index +1} in list has been added and time used is now {time_used}') else : print (f' item number {max_index +1} went over the time limit ' ) # if conditional is true, i.e., task can be completed update time_used # add print statements

# Input problem specific data and print it out from Step 1 priority = [ 2, 6, 1, 7, 10, 8, 5] time = [30,200,20,70,120,60, 150] n_tasks = len(priority) max_time = 8*60 # 480 minutes is equivalent to 8 hours which is our max time max_value = max(priority) max_index = priority.index(max_value) task_time = time[max_index] print ( f"TASK PRIORITY TIME TO COMPLETE") for task in range (0, n_tasks): print (f" {task+1} {priority[task]} {time[task]}") # # Initialize any variables before loop time_used = 0 # time is initialized to zero because thats the value we are worried about going over # # add for loop to go through all tasks # for item in range (0, n_tasks) : print ( ' **************************************************************************************') max_value = max(priority) max_index = priority.index(max_value) task_time = time[max_index] #the three lines above were repeated because it didnt work when i left them out print (f'try task {max_index + 1}') #loop created to only add times below the chosen max time if ( (task_time + time_used) <= max_time ) : print (f' task {max_index +1} in list has been added') time_used = time_used + task_time #since task was added time needs to be updated with the above formula print (f' time used is {time_used}') else : print (f' task {max_index +1} went over the time limit ' ) priority[max_index] = 0 print ('***************************************************************************************') print (f' sum of time of all tasks on day one is {time_used}' ) # # find highest priority left and task number it corresponds to from Step 3/4 # # zero out this entry in the priority list so you won't find it again # # add conditional to check to see if task can be completed as in Step 4 # # Print out the total time used for all tasks in day 1

# Input problem specific data and print it out from Step 1 priority = [ 2, 6, 1, 7, 10, 8, 5] time = [30,200,20,70,120,60, 150] n_tasks = len(priority) max_time = 8*60 max_value = max(priority) max_index = priority.index(max_value) task_time = time[max_index] print ( f"TASK PRIORITY TIME TO COMPLETE") for task in range (0, n_tasks): print (f" {task+1} {priority[task]} {time[task]}") # # Initialize any variables before loop time_used = 0 # # Initialize any variables before loop # # add for loop to go through all tasks # for item in range (0, n_tasks) : print ( ' **************************************************************************************') max_value = max(priority) max_index = priority.index(max_value) task_time = time[max_index] #the three lines above were repeated because it didnt work when i left them out print (f'try task {max_index + 1}') #loop created to only add times below the chosen max time if ( (task_time + time_used) <= max_time ) : print (f' task {max_index +1} in list has been added') time_used = time_used + task_time print (f' time used is {time_used}') if (time_used == max_time) : break else : print (f' task {max_index +1} went over the time limit ' ) priority[max_index] = 0 print ('***************************************************************************************') print (f' sum of time of all tasks on day one is {time_used}' ) # # find highest priority left and task number it corresponds to from Step 3/4 # # zero out this entry in the priority list so you won't find it again # # add conditional to check to see if task can be completed as in Step 4 # if this conditional is satisfied then add another conditional to check if time_used = max_time; if so break out of loop # # Print out the total time used for all tasks in day 1

# Input problem specific data old_priority = [ 2, 6, 1, 7, 10, 8, 5] time = [30,200,20,70,120,60, 150] n_tasks = len(time) max_time = 8*60 # # Create new priority list containing ratios # priority= [] # initialize the list which contains the new priorities which are original priority divided by # time it takes to complete this task # add for loop to create this list for i in range(n_tasks) : p_ratios= old_priority[i]/ time[i] priority.append(p_ratios) # use method .append() to create elements of the new priority list # # Remainder of code should be the same; this is because we called the new list which contained the ratios the same as # before. max_value = max(priority) max_index = priority.index(max_value) task_time = time[max_index] print ( f"TASK RATIO TIME TO COMPLETE") for task in range (0, n_tasks): print (f" {task+1} {priority[task]} {time[task]}") #sorry i cant figure out how to cut off decimals after a certain point time_used= 0 for item in range (0, n_tasks) : print ( ' **************************************************************************************') max_value = max(priority) max_index = priority.index(max_value) task_time = time[max_index] print (f'try task {max_index + 1}') if ( (task_time + time_used) <= max_time ) : print (f' task {max_index +1} in list has been added') time_used = time_used + task_time print (f' time used is {time_used}') if (time_used == max_time) : break else : print (f' task {max_index +1} went over the time limit ' ) priority[max_index] = 0 print ('***************************************************************************************') print (f' sum of time of all tasks on day one is {time_used}' )